line size

[fivepoint-0]

what size fuel line from the reg. to the fuel noids should I be using. right now I'm using two #4 lines to the fuel nods from a y block

[hammered54]

-6 from the regulator to the noid is all you should really need .

[fivepoint-0]

that's a #6 to each noid? dual stage, up to a 100 shot on each. I've only ran a 3/8" line from the pump to the reg. is that big enough?

[5secluv]

Originally Posted by fivepoint-0

that's a #6 to each noid? dual stage, up to a 100 shot on each. I've only ran a 3/8" line from the pump to the reg. is that big enough?

On that set up I would run atleast a 1/2" line from pump to the reg. With just a 100shot on each noid the -4 should be fine...IMO

[hammered54]

-4 is like 5/16 (pfw!) -6 is like 3/8 -8 is like 1/2. for what it worth...........on a race car or a stout street car I would'nt use any thing smaller than-6. .............................it is a race car yes?

[fivepoint-0]

street strip car.