PDA

View Full Version : times on the 2000 formula


mrr23
07-12-2006, 06:51 PM
pass #1
held rpms to 2200. as soon as the lights came down, i mashed the pedal which instantly activated the 75 shot. doing this netted me tire spin. let off, then went WOT again. 150 shot comes on at 3500 rpms. traction held. went 11.51 @ 119 with a 1.81 60ft both stages on at same time.

pass #2
car idling slightly rough, i richened up the stages a little. decided to reverse the procedure as the tires spun the first time. set the 150 to come on at 3000 rpms. this time sat at idle. when the lights came down, i mashed the pedal to WOT. no spin. 'waited' for the 3000 rpms activation of the 150 shot. when it finally did, the tires held, so i flipped on the 75 shot. netted me 11.444 @ 119.85 with a 1.802 60ft. with a better prepped track, i can improve on the launching along with earlier activation of the 150. those two things will get me closer to my realistic goal of 11.3x and closer to my optimistic goal of a 10 second pass on a stock motor from TB to exhaust manifolds.

http://www.stealthram.com/familypics/formula00/dynosheet/timeslip/may312006.jpg

mrr23
04-15-2007, 11:41 PM
latest on this 11.262 @ 122.78

http://www.stealthram.com/familypics/formula00/dynosheet/timeslip/dec172006.jpg

JAMZ87SS
06-01-2007, 06:12 PM
When are we gonna see some new numbers w/ the new mill?

mrr23
06-01-2007, 10:31 PM
if i can keep it together longer than 2 hours and 30 miles, about 3 months.

hammered54
06-02-2007, 12:29 AM
3 month's?? what's up with that??

JAMZ87SS
06-02-2007, 05:50 AM
Uh-oh , did it come apart? or are you just taking your time with break in?

BoostedZ28
06-02-2007, 11:48 AM
Needless to say, those are some impressive times! I see a 10 sec pass somewhere in the not too distant future.

mrr23
06-02-2007, 12:22 PM
motor lost oil pressure due to some material getting everywhere. had to take it apart and get the crank polished. putting it back together next week.

3 months is getting it broke in and tuned.

hammered54
06-02-2007, 12:28 PM
what car is that new mill in? two stage's 225hp total 11:44et ?? (I'm scratching my head right now)