Nitrous And Transbrake Wiring Hookup

[PROXT]

Hi I have just brought a NOS cheetah nitrous kit and wanting to hook it up. I also have these following parts to hook up. Also have a msd 7al3 ignition in car. Also are 20amp relays enough and what amp wire would you suggest. Is it possible for you to do me a diagram for all of this setup. I know one thing that with me on the transbrake with foot flat to the floor it would normally activate the micro switch. I know there must be a way around this. Any help would be much appreciated.




NOS Single Stage Plate System- Cheetah
Nitrous Progressive Controller Part # 15835BNOS
Purge
Nos Thermostatically Controlled Bottle Heater
Transbrake
Wot Switch
Fuel Pressure Switch

[MurdeЯ]

Heres what I have on file...

227

[PROXT]

What amp relays are you running. Also i want to wire my nos progreesive controller into that as well.

[MurdeЯ]

I run 30a.
Thats not my schematic, I just have a fairly decent collection of them and I cleaned it up some to get just a smaller file :D