New guy from Oklahoma

[DefEddie]

Yo,
I'm Eddie,I'm from oklahoma..
I was surfing the net looking for some tiny nitrous jet's or blank's to drill my own and thought I would look for a nitrous forum hoping they had a for sale section.
I've got several vehicle's,but only 2 have nitrous.My project truck is a 97 Yukon with Harris solenoid's,sniper bottle,NOS nozzle and custom line's that I put together to make a nitrous kit..My other one is...rather unique...It's a 2004 Tuk-Tuk,as of now it only has Purge for effect.I'm looking for some very small(.010-.014)jet's so I can make it functional.It has a 16hp 150cc engine..
Here's link's to a couple vid's.One is my Yuke at the track taking off with a 75 shot,and the other is my Tuk-Tuk shooting the purge..
http://www.youtube.com/watch?v=lB3pjGdXzZY
http://www.youtube.com/watch?v=t3NGcBg_V7M

[Nate]

Welcome to the boards man. There are a few forum sponsors that sell nitrous kits, and i'm sure they can hook you up with just the jets. What kind of kit do you have? the jets are different between kits like NOS and NX. You cannot use a NX jet on an NOS kit.

[DefEddie]

Yeah,I know that.
I use an NOS nozzle,and I didn't buy a kit.All you need is some solenoid's,line's,a bottle,button and switch with a couple relay's..
Nitrous is pretty basic..
Thk's for the info,I'll check out the sponser's.
Do you know if you can buy blank jet's that I can jsut drill myself?

[Nate]

You could buy some blank jets....i think they probably cost the same amount as jets that already have the proper sized hole....couple bucks.

if you would rather drill your own holes, you should try buying like a .010 or a .012 and the hole that's already drilled will serve as a guide for you.

[speedtweekerz]

hey man give us a call if you nd anything n2o related or otherwise we are a full stocking speed shop and are constantly adding new lines that we are buying direct for the best deals.
p.s. mention the n2o forum to recieve discounts! :thumbup:

[DefEddie]

Sound's good.
I need some NOS jet's size's .010 through .014
Those are the size's I need anyway,so blank's won't be necessary.

[nxcoupe]

Welcome to the boards!

[mrr23]

welcome.

[Russianred]

Welcome! I'm from Oklahoma too, hit me up if you wanna meet up or something.

[hammered54]

wow .. did I forget to welcome this guy too......sorry! 1/14/07 that before my time?

[Russianred]

*embarassed*. :o


My bad..

[hammered54]

it's o.k........your here now.

[Robert56]

:gap:
Robert